Trailer Ramp Mounting Channel Bracket 10ga Steel
When you're loading up your ATV, tractor, motorcycle, or other vehicle onto your trailer or truck bed, you want the process to go as smoothly as possible. Whether you're the one driving or the one helping guide everything, you'll know that there is one piece of the process that needs to be in good shape: the ramp. The ramp is the vital piece, as this decides whether or not the vehicle will be able to make it up or not. If it is a poor-quality ramp, you could end up struggling far more than you need to or even not being able to make it up the ramp. You don't want to have to worry about cracking, bending, or even breaking when you're guiding up an expensive piece of equipment. Even worse, you don't want to experience kickback. When your ramp is not properly secured to the truck or trailer and you try to drive the machine up onto it, the ramp can come out of it's set location and become a dangerous hazard. To prevent such a thing from happening, using a mounting bracket can be a lifesaver.
This RV ramp mounting channel completes the loading system and is made of sturdy 10 gauge raw steel. Measuring 48" wide by 4" deep by 1" high, it's made for trailers or trucks and can be used for back loading, side loading, or tailgate loading. Durable and long-lasting, this trailer ramp mounting bracket channel adds safety and security while lasting for years to come.
You don't want to worry about safety when you're loading up your ATVs for vacation. With the high-quality mounting channels (and ramps), you can make this process smooth and safe. Have any questions? Contact us online or call our friendly Customer Care team today!
- 10 gauge raw steel
- Dimensions: 48"W x 4"D x 1"H
- For trailers or trunk beds
- Back load, side load, and tailgate loading
- Custom bracket support to prevent kickback
- **Do not use while trailer or truck is in motion
- **Try and avoid placing all of the weight in the center of your truck or trailer
- **Needs to be treated, painted, or sealed before use