Taking a hot shower is one of the luxuries that come with having an RV. If your water heater isn't working properly, though, you could end up without this luxury. With the many moving parts and pieces on a tankless water heater, it can be difficult to know exactly what's up. If you've noticed that your water heater isn't turning on when the water hits it or it's turning on even when there's no water, then it could be an issue to do with the water flow sensor. If this is the case, then this replacement tankless water heater water flow sensor should do the trick to get things up and working again.
This tankless water heater water flow sensor measures 3" by 1 1/8" by 1 1 1/8" and is made of black ABS plastic. There are pins on either side to keep it in place with the water inlet on the water heater. This flow sensor works to detect the presence of the water flow so that it can turn on the water heater and heat the water only when you need it. This helps to not only conserve the water but make sure that when you need hot water, the water heater will turn on. There is an internal fan to sense the water flow and a 3-pin connector that is installed directly to the water heater set up.
With this replacement tankless water heater flow sensor, you can use your water heater when you need to and keep it off when you don't need it. Have any questions? Contact us online or call our friendly Customer Care team today!
- Tankless Water Heater Water Flow Sensor
- Detects the presence of water flow to turn on the water heater
- Helps to conserve water
- Dimensions: 3" x 1 1/8" x 1 1/8"
- Material: ABS plastic
- Color: Black
- Pins on either side to keep it in place
- Internal fan to sense water flow
- 3-pin connector installed directly to water heater
- Failure to winterize your water heater will cause damage to the water flow sensor