RecPro 40" RV Dinette Booth with Optional Table and Leg
- Same Day Shipping if ordered by 11am est
RecPro 40" RV Dinette Booth with Optional Table and Leg
At the crossroads of excellence and quality, you will find the new combo dinette kit from RecPro. There you will find a combination of our fastest selling product line:
- The Charles Dinette Booth Set: 40" (2) (with installation hardware)
- 27" RecFit Table Leg and Compression Fittings (1 or 2)
- Brackets (2 or 4)
- Hardware (18/8 Stainless Steel Screws*)
- RecLite Foam Core Table: 40" (Luna Imperial or Granite Chocolate design options)
This package is the complete kit for turning your empty RV into a home away from home by adding a whole kitchen experience to your rig.
The first and most important part of this combo is the booth set. Our newest and fastest selling furniture in the Charles line, the dinette booths, feature the same Charles comfort that the rest of the luxury line possesses but it has the added capability of transforming from an eating area into an extra bed. All you need do is remove the table from the RecFit leg(s) and position it between the booths on the support lip. The lip (which is low-profile so as to be unobtrusive when seated) is back mounted and extends far enough that the extra-strong RecLite table won't be in danger of slipping off onto the floor while you or your guests are sleeping.
The backrests for the dinette set provide ample cushioning so that the table won't be felt when you lay down to sleep. You'll still have that same bounce-back fill and standard Charles comfort between you and our proprietary custom table top support.
The booths don't just stop at luxury and transformative properties. Our design team also took a long and hard look at some of the drawbacks to the standard RV dinette booths. From the typical factory install models to other aftermarket RV suppliers, we spent many hours deconstructing these booths and we found a few items that were lacking across the board. First, we found that there was a huge gap in the comfort levels from even the regular couches and chairs to the booths. It seemed that whatever was left over on the factory floor was used to construct the dinettes from OEMs. We fixed that problem by making our dinette booths part of the Charles line. But there was another glaring issue that the manufacturers were not noticing: the compounded problem of anemic storage and the noise issues these compartments were causing.
Storage underneath average dinettes consists of not very well proportioned slide-out drawers. While at least attractive on the surface, they serve little in the way of actual storage. The drawers have small storage internally and excessive hardware that makes them a weight creator. Over time, these drawers become loose after years of road rigor and begin to bang around in their housings. This not only creates future repair issues but also adds to the sound levels in your RV. Our design team realized this was a problem and came up with an intelligent design solution. The entire bench underneath is an open storage area. Simply lift the seat and the width and depth of the bench is an entire storage area that won't wear down and won't cause sound issues. No worries about parts breaking down and needing replaced in this model; you'll only have the solid construction and low hardware count to contend with.
The other piece that compliments this combo is the RecLite Dinette Table. The corporate heads at RecPro spent a great deal of time and money to create a table experience that would set the rest of the industry on its back. The RecLite table does just that. While other models have outmoded underlayment such as MDS, compressed chip board, and other weighty materials that add generously to the poundage of your RV, we wanted to create something that would add comfort without adding weight. These factors affect the gas mileage of your RV negatively, not to mention contributing to the wear and tear on the vehicle and drivability concerns. How does the RecLite table help? Well, we'll tell you.
The RecLite table is a hollow foam construction that is used in the ramps of race car trailers. Not only is it strong enough to handle the weight of those massive vehicles as they enter and exit their trailers, but they do it at a fraction of the weight cost. The RecLite material will help you see as much as a 40% weight reduction in your table. If you combine that with our RecFit compression fit system, you have a table system that far outdistances its competitors. They aren't even on the same playing field.
The RecFit system (comprised of 27" post(s), two (or 4) brackets (cone or flush mount), and hardware (for top brackets only) is the quickest and surest way to put your table into place or quickly tear it down for storage and sleeping conversion. While other systems that have table brackets that require you to line up the posts specifically and twist them into locking position, our compression fit allows you to easily place the bracket onto the post and with a simple push down and turn, you're ready to go. Just as easily, you can give the lightweight table a simple twist and lift and you're ready to turn your dinette into an extra bed or open area in your RV.
As you can see, this combo kit has everything you need to succeed if you want to turn your open space near your kitchen into a full dining experience that you can enjoy over and over. If this sounds like a great deal (which it is) to you, then call one of our helpful Customer Care agents and order yours today.
*PLEASE SPECIFY THAT YOU WANT THE FULL COMBO AND NOT JUST THE DINETTE BOOTH SET*
- Overall dimensions: 40"W x 31 1/2"H x 22"D
- Spacious storage under the benches
- Tiona patterned Suprima 100% polyurethane faux leather
- Comes in colors: Putty, Toffee, Chestnut, and Mahogany
- Quickly converts to a bed
- No bulky slide-out drawers
- Charles luxury line design and feel
- Optional RecPro color-matching thread available
- Seat height: 19 1/2"
- Seat depth: 18"
- Weight of both 40" booths and table is 123 pounds
- Click here to order a FREE RecPro Furniture Swatch Sample
**ATTENTION** When installing the booth set with the RecLite table, make sure that the overall width of installation (measured from the backside of each booth) is 74 1/2". Each booth is 22" wide, and the tables (regardless of length) are 30" wide. This equals an overall measurement of 74". The extra 1/2" is so the table edges will not catch on the material and fit comfortably in the open space between the booths.
*We round up to the nearest inch of the piece*
All furniture is designed to fit through a 22" door opening
- 3 Year Limited
- 3-year warranty on structural components, springs, and mechanism
- 2-year warranty on Suprima Soft-Touch leather and thread (200,000 Double Rubs) 4 Year Hydrolysis (Made in China)
- 1-year warranty on mechanism actuator (Cable Release)