RecPro 36" RV Dinette Booth with Optional Table and Leg
RecPro has expanded their popular Charles line in many different directions. From adding the stylish Euro Chairs to their new line of Power Recliners, there have been a large number of improvements to the series. One of the most well-received additions has been the Charles Dinette Set with Full Sub-Storage and Bed Conversion. These booths offer the same Charles comfort and style but add storage capacity, reduced weight profile, and a sturdy (and comfortable) bed conversion option to your recreational vehicle.
Once we had the booths in-house, our corporate decision-makers then did what they always do with lines of product. They don't just find a part of the RV, offer only that piece, and then move on. Once we sell one portion of an area of the RV, we want to offer the entire package to our customers. We started by adding our extremely lightweight RecLite table. We knew they'd be a hit but tables need bases and legs and added those in as well. With all the components in place and all of them being well-received by our customers, we decided to take the next logical step and offer the entire grouping as a combo package. We're able to offer you everything in one purchase and at a better price than if you purchased everything separately. With this package, here's what you'll receive:
Our booth set (includes 2 ea. Charles Dinette Booths) is a step up in the aftermarket line of dining furniture products. Not only do you still get the extremely soft cushioning and buttery-soft Suprima leather, but our booths feature bench-wide storage underneath. While other manufacturers put slide-out drawers underneath their dinette booths, we know that road rigor will cause those drawers to loosen and create road noise. Not to mention the fact that they also add unnecessary weight to your vehicle and offer only a third of the storage space our booths offer. Lightweight and abundant with space, our booths are industry leaders across the board. These booths can be purchased all alon or in a set (outside of the combo kit.)
These booths by themselves would be a welcomed addition to any recreational vehicle. Combined with the rest of this product kit it will add a touch of class, comfort, and functionality to your RV.
Here at RecPro, we understand that upgrading your rig so you can downsize your weight profile is important for many RVers. With the fluctuation of fuel costs, traveling across the country can be a manageable task financially or so cumbersome to your pocketbook that you just stay home. This is why we manufacture and sell products that take this consideration into mind. Because of this, our dinette tops will meet and beat any specifications in the industry.
Our tables are the next generation in furniture technology available on the market. We worked diligently to find a supplier that would meet our standards of construction, aesthetics, and lightweight design. We found them and the result is our new line of dinette tops made with RecLite internal high-density hollow core foam. This underlayment is substantially lighter than virtually any other competitor in the market today. Most RV owners will see at least a 40% reduction in the weight of their tables with this product.
If you're worried about losing strength when losing weight, don't be. These tables can withstand up to 2,000 lbs. of pressure before they even begin to crack or fail. This table is meant to last (through normal use) for the life of your RV. Not only will it last, but its construction will help you in the long run as well.
If you've had a dinette set up in your RV in the past, you understand that the locking systems for tables can be difficult to manage and can break down over time so that your table will no longer stay in place. Our system is a non-complex operation that will allow for solid use for an extended period of time. The added benefit is that if the compression fittings on the end of the leg do break down after years of use, instead of replacing an entire unit (which can entail adding new brackets, re-drilling holes, measuring, etc.), you only need replace the leg alone and you're ready to go again.
This table and its support system are one of the best in the industry and will be a welcomed addition to your RV when you install this combo dinette kit.
Table Legs with Brackets
Support. From our helpful Customer Care Department to our myriads of RV aftermarket products, we're here to support you in any way we can. Knowing what proper support truly means, we applied our same philosophy to our dinette group configurations. We looked long and hard to find just the right support for our lightweight RecLite tables. We knew that we wanted to find a support leg that was not only aesthetically pleasing, but one that also was as lightweight and sturdy as the table it supported. We found just such a support pillar and we now added it to our dinette line and the dinette combination package.
This table leg is the perfect support system for this dinette set. Not only is it lightweight but when combined with the compression-fit bracket system, you have a package that will allow for a quick conversion from dining area to sleep area with just a few quick twists! The 27" leg has black compression fittings on each end that,w when simply pressed into the raised brackets (available with combo or separately), will lock into place and stay put until you are ready to convert to a bed or store your table away during travel.
This leg, brackets, and hardware (18/8 stainless-steel screws x6 available for top bracket only) are the perfect finishing touch to this combo.
With brackets, legs, table tops, and a set of dinette booths in this kit, as well as the RecPro brand (and RecPro guarantee), you can't go wrong in purchasing this comprehensive combination package. If you've even considered replacing your current dinette set-up or adding one to your RV for the convenience of having a dining area as well as an extra sleeping bunk, then call our Customer Care Department and order yours today!
- Spacious storage under the benches
- Tiona patterned Suprima leather
- Comes in colors: Putty, Toffee, Chestnut, and Mahogany
- Quickly converts to a bed
- No bulky slide-out drawers
- Charles luxury line design and feel
- Optional RecPro color-matching thread available
- Overall dimensions: 36"W x 31 1/2"H x 22"D
- Seat height: 19 1/2"
- Weight of 2 36" booths and table is 115 pounds
- Click here to order a RecPro Furniture Swatch Sample
If you'd like to see how this piece fits in with your RV floorplan, you can check out our virtual drag and drop seat configurator at designer.recpro.com!
*We do not condone using seat belts with our furniture unless they are installed by a licensed RV dealership. Doing so improperly may void the warranty.
- Table sizes - 36"L X 30"W, 38"L x 30"W, 40"L x 30"W, 42"L x 30"W, 44"L x 30"W
- Solid backer centrally located for quick installation
- Extra-strong RecLite foam core
- Up to 40% in weight reduction
- Design patterns: Luna Imperial and Granite Chocolate
- Supports up to 2,000 lbs. without failing or taking damage
- Table weights: 11.5 lbs. (38), 11.75 lbs. (40), 12 lbs. (42), 12.25 lbs. (44)
- Hardware: 6 ea. 18/8 stainless-steel screws
- Overall installation width: 74 1/2"
- Table leg
- Overall height: 27"
- Leg diameter: 2"
- Tapered cap diameter: 2 1/4"
- Base diameter: 6 1/2"
- Weight: 2 4/5 lbs.
- Bracket hardware: 18/8 stainless-steel screws (x6)
*Hardware with unit for top bracket(s) only
**ATTENTION** When installing the booth set with the RecLite table, make sure that the overall width of installation (measured from the backside of each booth) is 74 1/2". Each booth is 22" wide, and the tables (regardless of length) are 30" wide. This equals an overall measurement of 74". The extra 1/2" is so the table edges will not catch on the material and fit comfortably in the open space between the booths.
*We round up to the nearest inch of the piece*
All furniture is designed to fit through a 22" door opening
- 3 Year Limited
- 3-year warranty on structural components, springs, and mechanism
- 2-year warranty on Suprima Soft-Touch leather and thread (200,000 Double Rubs) 4 Year Hydrolysis (Made in China)
- 1-year warranty on mechanism actuator (Cable Release)