RecPro 36" RV Dinette Booth Cloth with Optional Table and Leg
- Coronavirus Update Shipping might be delayed
RecPro 36" RV Dinette Booth Cloth with Optional Table and Leg
When mealtime comes on your camping trip, you don't want to have to sit on uncomfortable chairs or a rickety table. To be able to really enjoy your meal, you need comfort and security. And when a guest comes over, finding a place for them to rest shouldn't be super difficult. In order to make your RV the efficient and comfortable place that it could be, you need furniture pieces that can serve multiple purposes and make use of all of the space possible. With this booth set, you get exactly that.
Each booth is designed to make use of all possible space. They have a roomy storage compartment below that will not rattle around as drawers would. In the older dinettes, the drawers seemed like a good idea. More storage room, right? But what actually happens with these drawers is that they would get stuck and become more of a hindrance than a help. Plus, they would rattle around when you're driving your rig, creating noise the entire way there. With the top-accessible storage compartment, you get a ton of storage without the noise or frustration. The booths can also turn into a bed when you add the table underneath the two booths. With these versatile and space-efficient properties, you can really make the most of your dinette booths.
The booths themselves are covered in a soft linen cloth material that is perfect for RV life and travel. Unlike vinyl or leather, the fabric will not heat up in the sun and make sitting down uncomfortable. Keeping as cool as possible, the linen cloth makes those hot summer days just that little bit better. But what about when you're already sweating? With vinyl or leather materials, you would have to deal with the sweat and even stick to the seat. The cloth, however, is breathable and soft, allowing you to comfortably sit without sticking. The attractive oatmeal or Fossil colors fit into any RV interior color scheme and are durable against the normal wear and tear of RV life.
Here at RecPro, we understand that upgrading your rig so you can downsize your weight profile is important for many RVers. With the fluctuation of fuel costs, traveling across the country can be a manageable task financially, or so cumbersome to your pocketbook that you just stay home. Because of this, we manufacture and sell products that take this consideration into mind. That's why our new dinette tops will meet and beat any specifications in the industry.
Our tables are the next generation in furniture technology available on the market. We worked diligently to find a supplier that would meet our standards of construction, aesthetics, and lightweight design. We found them and the result is our new line of dinette tops made with RecLite internal high-density hollow core foam. This underlayment is substantially lighter than virtually any other competitor in the market today. Most RV owners will see at least a 40% reduction in the weight of their tables with this product.
If you're worried about losing strength when losing weight, don't be. These tables can withstand up to 2,000 lbs. of pressure before they even begin to crack or fail. This table is meant to last (through normal use) for the life of your RV. Not only will it last, but its construction will help you in the long run as well.
If you've had a dinette set up in your RV in the past, you understand that the locking systems for tables can be difficult to manage and can break down over time so that your table will no longer stay in place. Our system is a non-complex operation that will allow for solid use for an extended period of time. The added benefit is that if the compression fittings on the end of the leg do break down after years of use, instead of replacing an entire unit (which can entail adding new brackets, re-drilling holes, measuring, etc.), you only need replace the leg alone and you're ready to go, again.
This table and its support system are one of the best in the industry and will be a welcomed addition to your RV when you install this combo dinette kit.
Table Legs with Brackets:
Support. From our helpful Customer Care Department to our myriads of RV aftermarket products, we're here to support you in any way we can. Knowing what proper support truly means, we applied our same philosophy to our dinette group configurations. We looked long and hard to find just the right support for our lightweight RecLite tables. We knew that we wanted to find a support leg that was not only aesthetically pleasing, but one that also was as lightweight and sturdy as the table it supported. We found just such a support pillar and we now added it to our dinette line and the dinette combination package.
This table leg is the perfect support system for this dinette set. Not only is it lightweight, but when combined with the compression-fit bracket system, you have a package that will allow for a quick conversion from dining area to sleep area with just a few quick twists! The 27" leg has black compression fittings on each end that, when simply pressed into the raised brackets (available with combo or separately), will lock into place and stay put until you are ready to convert to a bed or store your table away during travel.
This leg, brackets, and hardware (18/8 stainless-steel screws x6 available for top bracket ONLY) are the perfect finishing touch to this combo.
- Overall dimensions: 36"W x 31 1/2"H x 22"D
- Spacious storage under the benches
- Quickly converts to a bed
- No bulky slide-out drawers
- Overall height (top of hard backrest): 29 1/2"
- Seat height: 19 1/2"
- Weight of 2 36" booths and table is 115 pounds
- Material: Cloth Linen
- Color: Oatmeal or Fossil
- Click here to order a RecPro Furniture Swatch Sample
- Table size: 36"L X 30 W
- Solid backer centrally located for quick installation
- Extra-strong RecLite foam core
- Up to 40% in weight reduction
- Design patterns: Luna Imperial and Granite Chocolate
- Supports up to 2,000 lbs. without failing or taking damage
- Table weights: 11.25 lbs.
- Hardware: 6 ea. 18/8 stainless-steel screws
- Overall installation width: 74 1/2"
- Table leg
- Overall height: 27"
- Leg diameter: 2"
- Tapered cap diameter: 2 1/4"
- Base diameter: 6 1/2"
- Weight: 2.8 lbs.
- Bracket hardware: 18/8 stainless-steel screws (x6)
*Hardware with unit for top bracket(s) only*
*We round up to the nearest inch of the piece*
All furniture is designed to fit through a 22" door opening
- 3 Year Limited
- 3-year warranty on structural components, springs, and mechanism
- 2-year warranty on Suprima Linen and thread (200,000 Double Rubs) 4 Year Hydrolysis (Made in China)
- 1-year warranty on mechanism actuator (Cable Release)