RecPro 12V RV Macerator Pump
Emptying out your black water tanks may not be the most exciting part of your vacation, however, it is necessary for sanitation and space. The problem that can often arise, however, is that the solid and liquid waste in the black water holding tanks is not easy to get rid of through certain sizes of hose. In addition, you may have to use gravity to help unload the tank, which can limit the locations and types of waste disposal you can do. The solution to both of these problems is to get a macerator pump (or waste water pump). These pumps may not have a fun job but they make your job a lot easier. By grinding up the contents, the pump enables you to dispose of the waste through smaller hose sizes and because of the pump pressure, you can even dispose of the wast uphill and against the pull of gravity. With these extra perks, you can make this dirty job just a little bit easier.
Measuring 4 1/4" high by 4 1/2" wide by 11 1/2" long, this RV macerator pump connects to 12V DC power. The waste water pump type is a flexible impeller. It has a four-bladed design and each blade is made of 316 stainless steel. The impeller is made of rubber and zinc alloy. Because the pump is fresh-rinse capable, it's suited for easy clean-up and storage. There is a sealed manual turn key and the item has a 3-year warranty. The pump is designed for intermittent duty only.
With a high-quality pump like this, you won't have to stress about this dirty job any longer. While it still may not be the best part of your vacation, it doesn't have to be a difficult task and with this pump, it won't be. Have any questions? Contact us online or call our friendly Customer Care team today!
Macerator Pump Direct Replacement Chart
- Dimensions: 4 1/4"H x 4 1/2"W x 11 1/2"L
- Fresh water rinse capable
- Easy cleanup and storage
- New four-bladed design
- Sealed manual turn key
- Ignition protected
- Impeller: rubber/copper
- Ports: 1.5" RV connector 1" hose barb
- 3-year warranty
- Pump type: flexible impeller
- Intermittent duty only
- Impeller: rubber and zinc alloy
- Blade: 316 stainless "four-blade"
- Weight: 2.35KG
- Self-priming to a 5' lift when wet and 4' lift when dry
- 12/24V DC seamless motor shell
- Voltage: 12V DC
- GPM/LPM: 12/45
- Lead wires: 14 GA
- Fuse: 20Amp
- Max draw: 12.0Amp