SuperFlex RV Rubber Roofing - By The Foot
- Minimum Purchase:
- 5 units
*DISCLAIMER: Roofing ships in a box; It's important to unpack roofing material as soon as possible to avoid creasing. *Minimum 5' Purchase
SUPERFLEX is a state-of-the-art roofing membrane engineered to provide premium performance for today's demanding RV roof designs. SUPERFLEX Roofing Membrane is an Olefin-based single-ply membrane that is approximately half the weight of EPDM. SUPERFLEX Roofing Membrane is very stretchable and conforms to the multiple contours of todays RVs in a clean, chalk-free, non-fade membrane.
RV Manufacturers like Forest River, Crossroads, Northwood, and Outdoors RV are currently using SuperFlex as an alternative roofing material.
Recommendation for installation:
If one surface is porous (has small holes or spaces), such as plywood or fiberboard, it is recommended to wet laminate the membrane to the substrate. If both surfaces are non-porous, such as EPS or ISO, apply the adhesive to both surfaces 4-5 mils and allow to dry approximately 20-30 minutes, depending on conditions. Adhesive will turn from white to clear when it's dry. Apply membrane to roof deck and roll or broom down sheet to assure 100% contact area.
Please note that when applying your SuperFlex roofing membrane, apply the smooth side down and the textured side up.
**While this material is sold by the foot, RecPro can only ship up to 40' at a time. As an example, if you order 80', it will ship in two separate containers. Any orders over 40', please call our customer service to place the order.**
Benefits of Super Flex Roofing Membrane
- Size: 4 1/2', 8 1/2', 9 1/2' width
- Does not chalk (will not turn the side of the unit gray)
- Install roof textured side up
- Is .165 lbs/sq feet compared to EPDM at .29 lbs/sq foot
- Has a better puncture resistance than EPDM
- Has a non-skid surface for better traction
- Easily repairable
- Same color through entire substrate
- 100% solids sealant (will not shrink or crack)
- .028 Thick
To help with installation, we recommend using our RecPro 8010 RV Roof Adhesive.
Please note that when applying your SuperFlex roofing membrane to apply the smooth side down and the textured side up.
**PLEASE NOTE** All fiberglass/Filon/flooring/SuperFlex cuts are obtained from a master roll. This means the ends will have a rough edge and will be longer than the purchased cut length. This is done so the customer may cut the piece to exact specifications. Customer will make final cuts.