RecPro® Charles Collection

RecPro Charles 40" RV Dinette Booth with Storage | Converts to Bed

0 stars, based on 0 reviews
  • RecPro Charles 40" RV Dinette Booth with Storage | Converts to Bed
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth
  • RV Dinette Booth


Please note: table not included

How do you want to tell the story of your RV? What picture do you want to paint for yourself or for those that ride with you across country? Do you want to show off your interior decorator chops and create a home experience that will impress everyone that sees your RV? Or do you want to just leave the factory furniture in your rig and hope that everyone appreciates a ride that's just "good enough"? What story do you want to tell? How do you want to feel? Here at RecPro, we believe that you want to feel as good, if not better, than the amount of time and money you put into buying your RV. We believe that you and your experience are worth more than what the factories give you. We want to help you outfit your rig with the best that the aftermarket industry has to offer.

Your dining experiences account for a large portion of your time on the road. Yes, you have driving time and campground time figured in but three times a day (not including snacking), you sit down, either by yourself or with family and friends, and enjoy a meal. That means this time has a value to it and you want to experience that in comfort. You deserve luxury dining furniture from a great company at a great price.


Look and Feel

We at RecPro we would like to present our 40" Dinette Booth Set with Storage Compartments. This booth set (which can also be purchased as a single bench) is the next step in dinette luxury seating for your RV. Instead of anemically padded booth seats that present uncomfortable edges at the ends that dig into your hips, these Charles booths are thickly padded and have superior bounce-back with our patented fill that resists break down. You can comfortably sit four average-sized adults in our 40" Dinette booths and you can rest assured that the booths will be the same after you have your meals and vacations.

You don't have to just look to the padding for comfort with the Charles models. Our Suprima leather is some of the most, if not the most, comfortable RV furniture covering in the industry. Our customers have used words like "wonderful", "satiny", and "buttery soft" to describe the feel of the Suprima fabric. While its spectacular touch profile sets it far apart from the industry competitors, its durability, look, and ease of care puts it in a completely different category. The Tiona pattern is a beautiful cracked ("crazed") look that gives the Suprima a scaled presentation. While it has a cracked look, it is highly resistant to cracking, tearing, and punctures. It's also a cinch to clean. Most household cleaners (non-caustic) will clean any spills that hit the surface. A simple soap and water mixture or a cleaning wipe will take care of your Charles booth. Simple clean up is important when you have furniture that's around food every day.

The dinette booths come in the four-primary designer Suprima colors found in the rest of the Charles line:swatches

  • Chestnut
  • Mahogany
  • Putty
  • Toffee
  • Gunmetal

These booths look beautiful. They will be an impressive addition to any Class A, C, or fifth-wheel (or even your home) but they are more than just their looks. They've really got it where it counts.


Suprima Soft-Touch Leather - Industry Leading 3 Year Limited Warranty

  • 3-year limited warranty on structural components, springs, and mechanism.
  • 2-year limited warranty on Suprima Soft-Touch leather and thread.
  • 1-year warranty on mechanism actuator. (Cable Release)
Additional Fabric Information And Ratings:
  • Made in China
  • 200,000 Double Rub (Wyzenbeek Rating)
  • 5 year Hydrolysis Rating





The booths are a solid wood construction throughout and the seating is supported by a strong metal framework that is engineered to support years of use. You might think that with such strong construction, these booths are unwieldy and cumbersome to your RV's weight profile. That is not the case. The design team at RecPro put a lot of time into making these the ultimate dinette sets. Each booth weighs only 54 lbs. How are they so light? By using a forward-thinking design.

Our dinettes shrugged off the old ways of storage design that so many factories have used over the years. Most put bulky storage drawers underneath their booths with a side mounted face. While this makes for somewhat convenient access, in the end, owners find that these drawers just add to the problems in their RV. First, the drawers add to the weight profile of the vehicle. Any true RV owner knows that every bit of weight you add to your rig you're adding directly to your fuel bill. The drawers in dinette under-storage are typically made of heavier wood and also come complete with all of the slides and bracketing to hold the drawers in place. Weight, weight, weight, and more weight.

As owners you also understand the rigors of the road. This is one of the reasons most materials in recreational vehicle industry are made sturdier than their common market counterparts. Extra precautions have to be taken for vehicles that are constantly on the road, driving in all conditions across a myriad of infrastructures. All that wear and tear causes the internal items of your RV to come apart. When you have a bulky drawer underneath your dinette (one that offers little in the way of storage), it will wear down and begin to knock around inside of its cutout. That becomes a problem when it begins to add to road noise. When you begin to have a multitude of items in your RV, this bouncing around causes the noise level to go up along with your frustration. There's a simple way to avoid that and RecPro designers figured out how.

booth open

Our dinettes feature full-length storage underneath each booth. Wall-to-wall and top-to-bottom, you have a booth that gives you ample storage where before you would only have a drawer that utilized a third of the booth space. Adding space, reducing weight and noise, and getting Charles luxury comfort…how could you not want these wonderful dinette booths?

If this sounds like an addition you want for your recreational vehicle, then call our Customer Care Department and order yours today!



  • Spacious storage under the benches
  • Tiona patterned Suprima Poly-leather
  • Comes in colors: Putty, Toffee, Chestnut, and Mahogany
  • Quickly converts to a bed
  • No bulky slide-out drawers
  • Charles luxury line design and feel
  • Optional RecPro color-matching thread available
  • Click here to order a RecPro Furniture Swatch Sample


  • Overall Dimensions: 40"W x 31 1/2"H x 22"D
  • Inner dimensions when bed is folded out: 74"
  • To fold out dinette booth you need 75 1/2" apart
  • Seat height: 18 1/2"
  • Seat depth: 18"
  • Sold as set or individually
  • Weight of each 40" booth is 56 lbs.
  • Table not included

If you'd like to see how this piece fits in with your RV floorplan, you can check out our virtual drag and drop seat configurator at!

*We do not condone using seat belts with our furniture unless they are installed by a licensed RV dealership. Doing so improperly may void the warranty.



*We cannot make any recommendations regarding the installation of products to our customers*
*Any modification outside of manufacturer's suggested use (including, but not limited to, adding or removing mounting hardware, seat belts, brackets, clamps, etc.) immediately voids all warranties and waives liability from the manufacturer and all their subsidiaries*
All furniture is designed to fit through a 22" door opening


*Please note lighting, decor, and interior design may slightly alter color appearance of dinette*
**ATTENTION** When installing the booth set with the RecLite table, make sure that the overall width of installation (measured from the backside of each booth) is 74 1/2". Each booth is 22" wide, and the tables (regardless of length) are 30" wide. This equals an overall measurement of 74". The extra 1/2" is so the table edges will not catch on the material and fit comfortably in the open space between the booths.
*We round up to the nearest inch of the piece*

View AllClose